OSHA 30 Hour Construction Industry Training

The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry.

Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA rainings as an orientation to occupational safety and health for workers covcompliance issues.

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers.Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job.

Our OSHA 30 Hour Construction Industry Training Course is Fully Accepted by OSHA & CAL OSHA. Our 30 Hour Certification is Valid Nationwide!

The 30 Hour Course meets the state requirement for 30 hour OSHA construction training for supervisors in New York and Nevada.

Course Description - 30 Hour Construction Industry:

This module covers thirty (30) hours of courses, required by the Occupational Health and Safety Act (OSHA), that apply toward 30-hour Construction Industry course completion card.

This module is comprised of 23 sections, each either one or two hours in length, and covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help to meet the Construction Industry standards established by OSHA.

Learning Objectives - OSHA 30 Hour Certification

• Locate OSHA Standards references applicable to specific hazardousconditions and practices (Introduction to OSHA Standards)
• Recognize the aspects of 1926 Subpart C (GeneralSafety and Health Provisions)
• Implement preventative measures for accidents in their workplace (Subpart D-Occupational health and Environmental Controls)
• Describe types of personal protective equipment (PPE),and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
• Understand therequirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
• Identify typesof rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
• Identifythe critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
• Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
• Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
• Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
• Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
• Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concreteand Masonry)
• Identify the precautions and hazards to protect workers using explosives or blasting agents(Subpart T- Demolition)
• Protect workers who perform jobs on or around stairways or ladders at worksites(Subpart X - Stairways and Ladders)
• List and describe the hazards and prevalence of confinedspaces

You will be sent a copy of OSHA Standards for Construction. The book will serve as an invaluable resource for referencing OSHA standards that have been covered in this course, as well as researching regulations or standards that could help in establishing a safer workplace.

You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the courseplayer. You can find printable course summaries of each module in addition to a syllabus of the entire 30 hour course.

Course Pre-Requisite: None

OSHA 30 Hour Construction Course Testing:

All modules have a ten (10) question quiz that requires a score of 70 to proceed forward in the course. Each module quiz may be taken up to three times if necessary. The final exam consists of 20 questions and also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken up to three times if necessary.

OSHA 30 Hour Construction Time to Completion:

Once you enroll in the OSHA 30 Hour Construction Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.

OSHA 30 Hour Construction Card:

A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour Construction Outreach DOL course completion card within 4-6 weeks.

OSHA Accepted!

The OSHA Thirty Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.

Course Pre-Requisite:

The OSHA 30 Hour Construction Industry Outreach Training course does not have any pre-requisites; however, the OSHA 30 Hour Construction Industry Outreach training course or an equivalent of 30 hours of prior safety and health training plus 5 years of construction safety and health experience is a prerequisite for the OSHA 500 Trainer course.

30 Hour Construction Course Study Guide:

We do sell the OSHA 30-Hour Construction Outreach Study Guide in our online bookstore if you want one. This new 190 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card, The Study Guide sells for $59.95 and will assist you throughout the online course and can also be used as a future reference manual.

IACET Authorized:

In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.